EN
CN
FR
ES
PT
DE
CN
FR
ES
PT
DE
Registers smoke and sharp jumps in temperature in the room
Can operate independently from Ajax Hub, notifying of danger by means of a built-in siren
Independently tests the smoke chamber and gives prompt notification of the need to dust
Principle of operation
The device detects smoke by means of a camera with photoelectric sensor. If no smoke is emitted, the additional detector registers temperature increase in the room.nds.
Features
It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.
Installation and set up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
Classification
Radio channel smoke detector with temperature sensor and built-in siren
Type of detector
Wireless
Installation method
Indoors
Compatibility
Operates independently or with Hub, Hub Plus, Hub 2, ReX, ocBridge Plus, uartBridge
Sensing element
Photoelectric and temperature sensors
Activation threshold
+59°С ±2°С
Type of notification
Sound/light
Volume of built-in siren
85 dB
Alarm signal delivery time
0.15 s
False alarm filter
+
Interconnected alarms
+
Power supply
Battery: Two CR2 batteries
Power supply voltage: 3 V
Battery life — up to 4 years
Backup battery: CR2032
Jeweller radio technology
Communication range with central unit — up to 1,300 m in an open space
Two-way communication between devices
Operating frequencies — 868.0-868.6 MHz
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector polling period — 12−300 s
Additional temperature sensor
Available
Operating temperature range
From 0°С to +65°С
Permissible humidity
Up to 80%
Anti-sabotage
Protection against fraud
Jamming detection
Tamper-resistant
Remote set up
+
Dimensions
132х132×31 mm
Weight
220g
Certification
Conforms to the requirements of the technical regulations governing radio equipment
Warranty
Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.
Complete set
FireProtect detector
SmartBracket mounting panel
2 x CR2 batteries (pre-installed)
1 x CR2032 backup battery (pre-installed)
Installation set
User’s guide
Recommended products
CombiProtect
Wireless motion and glass break detector with pet immunity
HomeSiren
Wireless indoor siren
LeaksProtect
Wireless flood detector